Do You Know Ways To Determine A Chain Saw Blade And Chain?

Do You Know Ways To Determine A Chain Saw Blade And Chain?

When you’re ready to change your chain, the very first thing to do is determine the size of your chainsaw bar. If you happen to have an Oregon chainsaw, this ought to be simple. Simply examine the first two varieties of the ten-digit model number that is marked on the motor end of the blade. That’s your chainsaw bar length.

Is your chainsaw beginning to appear dull and not carry out also? Appears like it’s time to change the chain. In order to do this, you will have to know the length of both the chainsaw blade as well as the length and size of your chain. If you’ve had a look at the manufacturers’ charts, they may appear a little overwhelming. However it truly is quite basic once you understand exactly what’s involved in the length of the blade and chainsaw chain.

Do not have an Oregon chainsaw that quickly shows you the length of the blade? Then here are some pointers for figuring it out yourself.

What’s The Best Way To Measure A Chain Saw Blade?

Producers were kind enough to standardize the chainsaw blade lengths into two-inch increments. The most common sizes are 16, 18, and 20 inches although the complete range goes from 10 to 42 inches! When you measure your blade, round up to the closest 2-inch measurement if needed.

Blade and bar are two terms that are both utilized to suggest the very same item. This is the blade that extends from the case of the motor and carries the chain which is exactly what does the sawing for you.

To measure the chainsaw blade itself is basic enough to do. Simply put your measuring tape at the end of the bar up against the casing and measure directly down the bar all the way to the idea of the blade.

Determining A Chainsaw Chain

Still unsure? Simply contact your chain saw’s manufacturer or anybody who makes chains and they will be able to clean up any confusion you might have.

As an example, a 1/4″ pitch chain might have 52 drive links and be 2.17 feet in length, while a 3/8″ pitch with 52 drive links would be 3.18 feet in length. So the pitch affects the drive link size which impacts your blade’s length.

To measure the chain on your chainsaw, there are 2 things you will have to understand … the variety of drive links and the pitch of the chain.

A drive link is just a tooth on the chain and your chain’s length is figured out by the variety of drive links (or teeth). The pitch of the chain likewise impacts the size of the drive links.

So now that you know how to measure a chainsaw chain and chainsaw blade and are prepared to buy your replacement, have a look at the offers that upgrade daily at

The pitch of the chain is essential to referred to as it needs to match the pitch of both the drive sprocket along with the bar nose gear. This should be stamped on the drive link but if you have to measure the pitch yourself, take the range in between any 3 rivets of the chain and divide by 2.